01363 88111001363 881110

Orchard Farm Ltd Orchard Farm, Spreyton, Devon, EX17 5AS

Shopping Basket

Items:  items
Value: 

Back2Go Back Support

Back2Go Back Support

Back2Go Back Support



This is not a Maclaren product it is made by Wenzelite, but it is compatible with the Major Elite.

Although Lateral Supports and perhaps a Chest Pad can be fitted to the Major Elite the seat is not designed for a child who needs trunk support. This will usually require a more clinical piece of equipment. Unfortunately clinical pushchairs are often heavy and far less practical than the Major Elite for everyday use.

The Back2Go is a seat support which can go some way to converting a standard seat into a more supportive seat. It can be adjusted for the child's needs and moved easily from one standard seat to another, e.g. chair to pushchair.

The Back2Go back support is the back only part of the product above, i.e. without the Head Support which can be purchased separately, see below, or it can be used with a Winged Headrest.

Note this addition will not be suitable for all children and we recommend that you seek the advice of your child's health advisor.

Fits quickly to the Major Elite with two large straps clipped securely at the rear of the seat. The Back2Go takes less than a minute to mount on the Major Elite and must be removed before folding the pushchair.

The Lateral Supports are individually adjustable and can be fitted at three levels over a 10cm range, (adjustable vertically by a further 3.5cm). and horizontally by 3.5cm each side giving a minimum width of 15cm and a maximum of 22cm.



A padded nylon Trunk Harness with central zipper is included but this is removable if you prefer to use the standard 5 point Major Elite Harness. If you choose to use the Back2Go trunk harness then we recommend you remove only the Major Elite Shoulder Harness straps but still use the waist and crotch straps for safety.

The Back2Go is substantially made of quality components - 4mm thick curved plastic back, 4mm aluminium plate lateral supports, velour type fabric with some but limited padding - we would prefer to see more padding over the Lateral Supports but you could probably supplement this if you want.

Height: Back2Go 40cm (16")
Width: Overall 33cm (13")
Lateral Support: Size 12cm (5") x 11cm (4") , Vertical Position lowest 5cm (2") highest 30cm (12") Horizontal Position min. 15cm (6") max 22cm (9")
Weight: Back2Go 1.6kg (3.5lb)

Back2Go User Manual

IMPORTANT. It is possible that the large plastic knobs on the rear could cause wear to the fabric on a seat or the Major Elite, you can reduce this by adding padding as appropriate.



Compatibility - this product can also be used with


VAT EXEMPT - you will need to confirm in the checkout that you are eligible for VAT Relief because you are buying this for a child due to their medical condition

Total Price99.00 (including delivery and when exempt from VAT at 20%)

Back2Go Back & Head Support

Back2Go Back & Head Support



This is not a Maclaren product it is made by Wenzelite, but it is compatible with the Major Elite.

Although Lateral Supports and perhaps a Chest Pad can be fitted to the Major Elite the seat is not designed for a child who needs trunk support. This will usually require a more clinical piece of equipment. Unfortunately clinical pushchairs are often heavy and far less practical than the Major Elite for everyday life.

The Back2Go is a seat support which can go some way to converting a standard seat into a more supportive seat. It can be adjusted for the child's needs and moved easily from one standard seat to another, e.g. chair to pushchair.

Note this addition will not be suitable for all children and we recommend that you seek the advice of your child's health advisor.

Fits quickly to the Major Elite with two large straps clipped securely at the rear of the seat. The Back2Go takes less than a minute to mount on the Major Elite and must be removed before folding the pushchair.

The Lateral Supports are individually adjustable and can be fitted at three levels over a 10cm range, (adjustable vertically by a further 3.5cm). and horizontally by 3.5cm each side giving a minimum width of 15cm and a maximum of 22cm.



The Head Support is also height adjustable.

A padded nylon Trunk Harness with central zipper is included but this is removable if you prefer to use the standard 5 point Major Elite Harness. If you choose to use the Back2Go trunk harness then we recommend you remove only the Major Elite Shoulder Harness straps but still use the waist and crotch straps for safety.

You can purchase the Back2Go Seat and the Back2Go Head Support as separate units, if you prefer (see below).

The Back2Go is substantially made of quality components - 4mm thick curved plastic back, 4mm aluminium plate lateral supports, velour type fabric with some but limited padding - we would prefer to see more padding over the Lateral Supports but you could probably supplement this if you want.

Height: Back2Go only 40cm (16") Back2Go with Head Support min. 54cm (21") max 61cm (24")
Width: Overall 33cm (13")
Lateral Support: Size 12cm (5") x 11cm (4") , Vertical Position lowest 5cm (2") highest 30cm (12") Horizontal Position min. 15cm (6") max 22cm (9")
Weight: Back2Go with Head Support 1.9kg (4.2lb) , Back2Go only 1.6kg (3.5lb)

Back2Go User Manual



IMPORTANT. It is possible that the large plastic knobs on the rear could cause wear to the fabric on a seat or the Major Elite, you can reduce this by adding padding as appropriate.



Compatibility - this product can also be used with


VAT EXEMPT - you will need to confirm in the checkout that you are eligible for VAT Relief because you are buying this for a child due to their medical condition

Total Price139.00 (including delivery and when exempt from VAT at 20%)

Back2Go Head Support

Back2Go Head Support



This is not a Maclaren product it is made by Wenzelite, but when used with the Back2Go Back Support it is compatible with the Major Elite.

The Head Support attaches easily to the Back2Go and is height adjustable on a sturdy 2mm steel mount

Please note; it cannot be used on the Major Elite independent of the Back2Go.

The Head Support is padded and comfortable, with velour type fabric cover.

Height: Seat 40cm (16") Seat with Head Support min. 54cm (21") max 61cm (24")
Width: 22cm (8 1/2") x 10cm (4")
Weight: Head Support 300g (0.7lb)

Back2Go User Manual

IMPORTANT. It is possible that the large plastic knobs on the rear could cause wear to the fabric on a seat or the Major Elite, you can reduce this by adding padding as appropriate.



Compatibility - this product can also be used with


VAT EXEMPT - you will need to confirm in the checkout that you are eligible for VAT Relief because you are buying this for a child due to their medical condition

Total Price59.00 (including delivery and when exempt from VAT at 20%)

Recently Viewed